MOT CLASS 4 + FULL SERVICE

Full Service at Kennings

From checking seat belt operation to the exhaust system, brake pipes to suspension springs, our comprehensive Full Service gives your car some serious TLC. We’ll also replace the engine oil, oil filter, engine air filter (and where applicable, points and condenser), top up fluids, and lubricate grease nipples.

We’ll Replace

• Engine oil

• Oil filter

• Engine air filter

• Top up fluids and lubricate grease nipples (where needed)

• Everything is checked, from seat belt operation to the exhaust system.

Full Service + MOT Work Schedule

No additional work will be carried out without prior approval.

• Check lights: side, reverse, number plate, fog, brake, tail, indicators, headlights, repeaters, reactors, and hazards

• Check number plate condition

• Check fuel cap condition

• Check horn operation

• Check ABS warning light for correct operation

• Check heater plug indicator (Diesel)

• Check seat belts front and rear (including lap belt)

• Check windscreen wiper blade condition

• Check washer operation (front and rear)

• Check shock absorbers (bounce test)

• Check tyre wear and record measurements

• Lubricate accessible door hinges

Under the Bonnet

• Renew air filter if required

• Remove and check pollen filter condition (additional cost)

• Replace pollen filter (additional cost)

• Check and top up brake fluid

• Replace brake fluid every 2 years (additional cost)

• Check and top up screen and headlight washer reservoir

• Top up power steering reservoir if required

• Check cooling fan for operation (where applicable)

• Check and top up antifreeze/coolant

• Drain and replace coolant if due

• Visual check of hoses and pipes for condition (where visible)

• Clean and grease battery terminals and check voltage

• Visual inspection of drive belts (adjust where applicable)

• Check timing/cam belt replacement (report if due)

• Lubricate bonnet latch and hinge

Vehicle Raised

• Renew engine oil (synthetic and specialist oils at extra charge)

• Replace oil filter

• Run engine and check for engine and gearbox oil leaks

• Refit sump plug

• Check wheel bearings for play and noise

• Check steering components for wear, corrosion, and leaks

• Visually inspect brakes where visible

• Visually inspect brake system hydraulics for leaks and corrosion

• Check brake servo operation

• Check handbrake operation and adjust if needed

• Inspect and report on exhaust system

• Inspect front wheel cylinders/calipers for leaks and operation

• Check and record tyre pressures for all 5 tyres

• Check propshaft/drive shaft, joints, and gaiters for security and condition

• Check suspension springs

• Check shock absorbers

Road Test

• Check gearbox operation

• Check engine noise

• Check clutch operation

• Check for excessive exhaust smoke

• Check steering operation

After Road Test

• Recheck engine oil levels

• Check wheel nut torque settings and adjust if needed

• Stamp service book if available